750ml Construction PU Foam Adhesive
Descriptions:
1.Door insulation pu foam is a one component plyurethane foam used to seal gaps and crevices on window, door etc;
2.The foam that dispenses from the aerosol can is moisture cured and draws humidity from the air for cure;
3.Pu foam is widely used in sealing around doors, windows,pipes,indoor fittings or any other applications in construction.
4.Provides an excellent bond to lumber,plywood,concrete,metals,masonry and other substrates.
Density (15-30 KG/M3) |
15-30 |
Adhesive strength(PVC to PVC ) |
above 100kPa |
Adhesive strength(aluminum to aluminum ) |
above 80kPa |
Elogation at break |
8-20 |
Shear Strength |
22-50kPa |
Thermal conductivity |
below 0.035W/MK |
Tack-free time |
7-13min |
Cutting time |
60min |
close cell rate |
60-70% |
Shelf life |
9Months |
Way to apply:
1.Shake can well to make the foam ready for use;
2.Clean the substrate and spray some water on it;
3.Screw foam dispenser on tightly and turn can upside down;
4.Vertical fill the gaps from the bottom upwards;
5.Foam is tack-free(dry to the touch) in 8 to 10 minutes in temperatures between +18°C and + 25 °C(65 °F-77 °F). Higher temperature will result in faster setup times;
6.Remove unwanted cured foam by cutting it with knife.
Package&shipping:
1.12/15 TIN per carton;
2.private lable five ply carton;
3.nozzel inside carton;
4.packing belt avaliable if requested;
5.300ml/500ml/750ml/by drum
6.1296cartons/20'container for 750ml
Features:
Foam Color: white
Tack free time:10minutes
Cut through:One hour
Processing temperature:+5 °C- +35 °C(+41 °F to +95 °F)
Optimum processing:+18°C to +25 °C(+64.4 °F to +77 °F)
Short-term resistance range:-40 °C to +110 °C(-40 °F to +230 °F)
Long-term resistance range:-30 °C to 80 °C(-22 °F to +176 °F)
PU FOAM SAFTY:
1.Keep out of children's reach ;
2.Keep upright;
3.Shelter from direct sunlight;
4.Do not expose to temperatures exceeding 50°c(122°F);
5.Do not pierce or burn even after use;
6.No smoking during the whole spraying procedure.
Read instructions carefully before using. During application avoid contact with skin. Wear gloves ! Can contains small parts of inflammable propellant. Therefore,ventilate carefully during working and avoid open fire and use of electrical equipment etc.