One Component Household Polyurethane Spray Foam

one component  polyurethane foam spray


Features:


1.Construction polyurethane foam is a one component plyurethane foam used to seal gaps and crevices on window, door etc;
2.The foam that dispenses from the aerosol can is moisture cured and draws humidity from the air for cure;
3.Pu foam is widely used in sealing around doors, windows,pipes,indoor fittings or any other applications in construction.
4.Provides an excellent bond to lumber,plywood,concrete,metals,masonry and other substrates.
5.Foam Color: white
6.Processing temperature:+5 °C- +35 °C(+41 °F to +95  °F)
7.Optimum processing:+18°C to +25 °C(+64.4 °F to +77 °F)
8.Short-term resistance range:-40 °C to +110 °C(-40 °F to +230 °F)
9.Long-term resistance range:-30 °C to 80 °C(-22 °F to +176 °F)

 
Way to Apply:
 
1.Shake can well to make the foam ready for use;
2.Clean the substrate and spray some water on it;
3.Screw foam dispenser on tightly and turn can upside down;
4.Vertical fill the gaps from the bottom upwards;
5.Foam is tack-free(dry to the touch) in 8 to 10 minutes in temperatures between +18°C and + 25 °C(65 °F-77 °F). Higher temperature will result in faster setup times;
6.Remove unwanted cured foam by cutting it with knife.

Technical Data:
 
     
 
 

PU FOAM SAFTY:
1.Keep out of children's reach ;
2.Keep upright;
3.Shelter from direct sunlight;
4.Do not expose to temperatures exceeding 50°c(122°F);
5.Do not pierce or burn even after use;
6.No smoking during the whole spraying procedure.
 
Read instructions carefully before using. During application avoid contact with skin. Wear gloves ! Can contains small parts of inflammable propellant. Therefore,ventilate carefully during working and avoid open fire and use of electrical equipment etc.

Company Information