High Quality No More Nails Sealant

• Customization: Available
• CAS No.: 6474289-8
• Bonding Function: Structural Adhesive
• Model NO.: NM-1667
• Application: Automobile, Construction, Woodworking, Footwear & Leather, Fiber & Garment
• Material: Acrylic Adhesives
• Classification: Room Curing
• Main Agent Composition: Inorganic Adhesive Material
• Characteristic: Weatherability
• Promoter Composition: Styrene Acrylate Copolymer
• Composition: Inorganic Material
• Color: White, Beige, Clear
• Odour: Light Solvent Smell
• Viscosity: Approx 110.000 Cps ()25
• Specific Gravity: 1.16 G Cm3
• Solid Content: Approx.75%
• Working Time: 5-10 Minutes, Depending on Temp
• Open Time: 20 to 30 Minutes, Depending on Temp
• Maximum Bond: 12-72 Hours Depending on Temp
• Transport Package: 24 PC in Box
• Specification: 300 ml
• Trademark: BU SEAL
• Origin: China
• HS Code: 3506100090
• Production Capacity: 20 Container Per Month
• Package Size: 30.00cm * 20.00cm * 24.00cm
• Package Gross Weight: 7.700kg
• Lead Time: 7 days (1 - 20000 Pieces) ; To be negotiated ( > 20000 Pieces)

Product Description

 

about wonstar

 

ABOUT WONSTAR

WONSTAR the esteemed company in china established more than a decade which specialized in adhesive products, such as NO more nails,silicone sealant,PU foam,epoxy gap filling sealant,pvc/cpvc glue and other construction adhesives.With more than one decade development WONSTAR product is well known at china and other world countries,We stick to the principle of winning market by quality, credibility and honesty,from choosing of raw material,pre-production inspection of semi-finished product to finished product. Wonstar make great efforts in the whole production process .Because of our accuracy,quality and honesty we win customer heart and we develop well with our lots of customers around the world.We get more confident from our customers and their kind support.We continue our research and experiments for new products and we will bring always new page of adhesive

DESCRIPTION
WONSTAR No More Nails general-purpose adhesive and sealant for interior or exterior general construction work. No More Nails is a gunnable, synthetic rubber based adhesive which exhibits excellent green strength, flexibility, good temperature resistance and good slump resistance.

RECOMMENDED USES •
 As a contact adhesive for installation of wall and floor panels. • Metal, timber & other sheets of plan materials to concrete, plaster or other rigid   surfaces. • Most bonding applications where high strength, gap filling one component adhesive is required. • Timber, metal, cementitious and plaster   sheets to timber or metal studs. • Installation of battens or other fixings to brick, masonry or concrete walls. • General-purpose construction   adhesive.  Suitable to use on foamed polystyrene. • Ideal for mirror backed tiles.

FEATURES & BENEFITS
Nail free general construction adhesive. • High bond strength • Excellent adhesion and sealing properties. • Excellent green strength. • Good temperature resistance. • Chemical resistant. • Good slump resistance. • Bonds a variety of construction and building materials. • Ideal for interior and exterior applications.

PERFORMANCE PROPERTIES

Appearance	Thixotropic heavy paste like consistency
Color	white,Grey
Odor	Solvent
Viscosity	Approx. 110,000 cps @ 25ºC
Solids content	Approx. 77%
Specific Gravity	1.16 g/cm3
Flammability	Flammability. Flashpoint -20ºC
Chemical Resistance	Very Good
Service temperature	-30ºC to +140ºC
Working time (initial contact)	5-10 minutes, depending on temp.
Open time (reposition)	20 to 30 minutes depending on temp.
Maximum bond	12-72 hours depending on temp & thickness.

 WONSTAR No More Nails meets the specification of EU Standard AS2329-80 (Mastic adhesives for fixing wallboards).



 PACKAGING
 No More Nails is available in 420gm (300ml) cartridges, 24 per box.

 COVERAGE
 20 lineal meters of 6mm bead from a 420gm cartridge.


APPLICATION INSTRUCTIONS
WONSTAR No More Nails can be applied either as a two-way contact or a one-way stick adhesive. In both cases the first requirements is that both surfaces to be bonded are clean and dry and free of grease, oil or dust. Any loose or flaking paint must be removed and lightly sanded before application. (Substrate surface temperatures should not exceed 30°C and the product should not be used where continued exposure to elevated temperatures will occur). To one of the freshly prepared surfaces apply a 4-6mm bead of adhesive with a cartridge or extrusion gun, or similar type profiles with a notched trowel. Beads should not be more than 45cm apart and butt joints should be adhered on both panel edges. Bring both surfaces together immediately.
• Two-Way Method Press firmly over entire surface to transfer adhesive and then pull both surfaces apart. Allow to tack-off for a few minutes (3-5 minutes depending on ambient weather conditions) and then reposition and press firmly together. Contact areas should then be tapped with a hammer via a padded block to ensure intimate contact. Depending on the weather conditions and surfaces bonded, maximum bond strength will take from 12-72 hours to be reached. Some weighted panels may require temporary mechanical fastening that should be retained for at least this period.
 • One-Way Method This method is recommended for heavier panels or those that are formed to place a loading or stressed memory on the bond line. After applying adhesive and bringing substrates together, they should be sufficiently clamped, nailed or screwed in a fashion that maintains maximum surface contact at bonded interfaces. Mechanical fasteners should be retained if highly stressed; but temporary fastening can be released after a minimum of 24 hours. For flooring applications, the adhesive should be applied to the flooring manufacturer's specifications. To stop floor squeaking, apply a bead of adhesive into the grove of each board after it is laid and immediately prior to mating the tongue from the next panel or board.

PRECAUTION
Always test prior to bonding with this product.
Plasticizer migration can occur with some PVC materials.
Veneer plywood can be affected by solvent soaking through the ply causing bubbling of the veneer. P.A.T.S (Pretested Adhesion To Substrate) Program  WONSTAR offer a service in which a program has been established to eliminate potential field problems by pretesting WONSTAR adhesives with samples of building materials to which the adhesive will be applied. This service is available on large projects where pre-application testing will aid in determining the proper surface preparation method to achieve optimum adhesion. Consult a WONSTAR representative for further information.

 HEALTH AND SAFETY
 • If working in an area with poor ventilation or in a confined area, recommend a mask be worn.
 • Avoid contact with skin, eyes and avoid breathing in vapour.
 • Use in a well-ventilated area.
 • If swallowed contact doctor or Poisons Information Australia If skin contact occurs, wipe off excess and remove contaminated clothing. Wash         affected area thoroughly with soap and water.
 • For more detailed information refer to Material Safety Data Sheet. CLEAN-UP Any wet or partially wet adhesive can be removed with scraping and   Solvent.
 Dried adhesive is best removed with a scraper or by sanding.

STORAGE
Store in cool (below 25°C) dry area out of sunlight and in a well-ventilated area. Keep containers securely sealed. Store away from foodstuffs and incompatible materials. Dangerous Goods Class 3 must be transported in accordance with State regulations. FIRE Sealant and vapor are flammable when temperatures exceed flash point. Use foam dry chemical and carbon dioxide to fight fire. Fire fighters should wear full protective clothing and self-contained breathing apparatus with full face-piece.

company informations

 

Company Informations:
 

Company Name:	Yiyang Wonstar Building Material. Co.,Ltd
Year Established:	2012
Products:	No more nails,Silicone Sealant, Polyurethane Foam, Pu sealant,Epoxy ceramic tile sealant,PVC glue and CPvc glue.
Markets:	Middle East, Africa, EU, America, South East Asia,etc
Factory Location:	shandong, China
Staff No.:	Over 100
Platform:	Made in China, Official Website, Canton Fair and Abroad Fair,etc
Ability:	20 containers a month.
Experience:	More than 15 years in international market
Advantage:	High reputation among our customers worldwide all these years on products stable qualities, best reasonable prices and professional, patient services.

FAQ

 

Questions:

1.Can u send sample to us ?
   Yes, the sample is free to you .
 
2.Can you give us private design ?
    Yes, the moq with private design is 500cartons; for factory design, moq is 100cartons
 
3.What's the payment item?
   By T/T, 30% as deposit, the rest to be paid after finish production or after seeing the BL copy
 
4.Where is your port?
   Qingdao 
 
5.What's your guarantee?
We guarantee goods quality is same as sample's and what we descrip.
 
6.Can you provide us your client information ?
   Yes, for checking our company reputation and sample collection.
 
7.How many days you want to produce one 20'container?
     Maximum 15 days
 
8.Can we visit factory?
   Yes any time.
 
9.Documents ?
 
   Packing list, commercial invoice, CO / FORM E / FORM A , BL making    according to your demand. 
 
Our services:
1.fast and smile ontime service;
2.sample checking before order;
3.ontime production feedback;
4.documents made according to your demand;
5.best after-sales service.